Posted on

How to make cbd oil for vape pen

How to Make Your Own CBD Vape Juice

The global vaping industry is taking the world by storm, rapidly expanding across the globe. In just a few years, CBD vape juices and e-liquids have become dominant products on the market. It seems that people simply adore vaping CBD for the most obvious reasons.

It’s fast-acting, discreet, delicious, doesn’t get you high, and offers a range of potential health benefits. According to CBD oil experts, Ministry of Hemp , the thing with CBD oil for vaping is that the oil goes straight into your bloodstream, allowing you to feel the effect almost immediately.

However, this increasing popularity made CBD vape juice quite expensive. Fortunately, you can save some cash on the side by learning how to make your own CBD vape juice, so let’s get down to it right away.

PG and VG: Finding Your Ratio

The journey to making your own CBD vape e-juice of the highest quality starts with finding the proper PG/VG ratio for your taste. Propylene glycol and vegetable glycerin are two main compounds found in every e-liquid.

These are the most popular and top-rated carrier oils you need for your CBD juice. There are some differences between the two; PG offers a higher liquid-like consistency, while higher VG percentages make for a smoother vaping experience.

Since you need the CBD-isolate to complete your vape juice, you can’t use VG only as it won’t dissolve the isolate. Therefore, you’ll need a higher ratio of PG for your CBD vape juice to ensure the isolate gets properly dissolved within your e-liquid. Aim for 70/30 PG to VG for the best solution.

The Necessary Ingredients for Making CBD Vape Juice

Now, since you have your PG/VG ratio under control, let’s see what equipment you need to start making your own vape juice. The good thing is that you can find most of the necessary items at a local supermarket or online. Here are the essentials:

  • Gram scale
  • Clean syringe
  • Fine mesh strainer
  • Mortar and pestle
  • A pot of a medium size
  • Small container
  • Glass bottle
  • A dropper

Basic Steps for Making Your Own CBD Vape Juice

Here are some basic steps for making your CBD vape. Note that this recipe is made for 0.5g of CBD isolate. You can tweak it as you become more experienced, but we recommend that you start small and slow and work your way up. Here are the steps:

  • Put your CBD isolate crystals on the gram scale and measure 0.5g;
  • Use a mortar and pestle to grind your CBD isolate until you achieve a fine powder consistency;
  • Measure somewhere around 0.5-1 ml of terpenes and mix it with your 70/30 PG/VG ratio to get around 30 ml of total vape juice;
  • Take a small mixing container and place your vape juice into it;
  • Mix your solution with ground CBD isolate powder;
  • Secure the lid of the container;
  • If you have a vortex mixer use it to properly even out the mix or give your mixture a few shakes by hand;
  • At this point, you should have a pot with heated water where you will submerge your mixing container;
  • Keep the temperature on medium-high heat;
  • Turn the heat to low at the boiling point and put your container in the pot;
  • Remove the container after about five minutes;
  • Give it another shake;
  • If you still can see CBD crystals, repeat the previous two steps;
  • If you can’t see the crystals, allow your vape juice to cool for at least half an hour;
  • Once cooled, take a glass bottle and use a fine-mesh strainer to filter through your vape juice.
See also  Cbd oil for cooking

Friendly advice: Please, do not microwave your CBD vape juice under any circumstances. It won’t do you any good, and it will only destroy the precious ingredients.

Terpenes You Should Use

Terpenes are in charge of the flavor of your vape juice. So, before you can choose the right terpenes, you need to decide on the flavor you want in your vaping session. Since terpenes are a bit of a complex subject, we have a few recommendations for you:

  • Top terpenes for daytime – beta-caryophyllene (smoky, black pepper, spicy), humulene (floral, citrusy, hops), alpha-pinene (fresh, earthy, pine), limonene (lemon, sweet, citrusy, tart);
  • Top terpenes for nighttime – myrcene (fruity, musky, mango), linalool (herby, floral, lavender), menthol (icy, refreshing, minty), terpinolene (floral, apples, sweet).

Optimal Shelf-Life Tip

If you want to achieve the best optimal shelf-life for your CBD e-juice, make sure you store it in a dark and cool place. If it’s sealed tight in a dark glass bottle, it could last up to 12 months before it starts losing its potency.

Conclusion

With all these useful tips, you should be making your DIY CBD vape juice without any problems in no time. Always use the best, highest quality ingredients to make sure you stay healthy. Now, the only thing left for you to do is to buy a decent vape pen to vape your CBD juice like a real professional.

2 comments

The first step is to make sure you have all the necessary items. They are: -CBD oil -A vape pen cartridge with a mouthpiece and battery -Liquefied glycerin or propylene glycol (PG) -A dropper bottle for mixing the ingredients together -Distilled water, if using PG as an ingredient -Vegetable glycerin, if using VG as an ingredient The second step is to measure

My local vape store owner told me that Terpenes are not necessary, and instead I can add 10ml PG based Aroma to 100ml CBD solution. Is this right?

Vaping Craze: How to Make Cannabis Oil for Vape Pens

One of the reasons why folks turn to vape is, of course, it could stone you more so than your standard king roll.

Vaping has been all the rage in the last few years. It’s become one of the favorite ways to consume weed, especially among younger generations. Vaping works for both THC and CBD. The smoke is cleaner, and the effects are stronger.

In 2019, in California, the U.S. largest recreational market, cannabis concentrates sold as vapes—for the first time in history—outsold flowers. According to figures from BDS Analytics, vapes outdid with 37 percent vs. 33 percent of total sales. Since then, the market has continued to grow, extending to include an array of new and even better vape products. Typically, weed vaporizers encompass pens that work with no-high CBD, concentrates, vape oil, and also dry flowers. Vaporizers heat the oil into vapor which gets you high, without releasing the pungent smell characteristic of marijuana. Vape pens are also easy to transfer and work well for those who seek to conceal their getting high habit. The only way for someone to find out if you were high from vape is if they did a urine test for the presence of THC. It’s generally younger people who put their hands on vapes. However, the trend has pushed the entire industry in this direction.

See also  Where can i purchase cbd hemp oil for chronic pain

Stronger high

One of the reasons why folks turn to vape is, of course, it could stone you more so than your classic king roll. According to one study, vaping produces “higher concentrations of THC in blood compared with equal doses of smoked cannabis.” More research has also pointed out that people, especially users around the age of 30, are keen to seek weed accessories that will result in a greater high.

DIY: How to make cannabis oil for vape pens?

In states where cannabis is legal, users are able to purchase liquid THC-filled cartridges. Many of these smoking gadgets are versatile in function, meaning that the brand that sells smoking pens does not necessarily have to offer marijuana pods. Just take Juul, one of the most famous e-cigarette devices. Users can re-fill their cartridges with cannabis juice from someone else. Or, if you are up for the challenge—you can make cannabis oil for vape pens yourself. It will take less time to create your own vape pens if you do have cannabis concentrates. Alternatively, you can make use of cannabis flowers, but with that, you have the extra step to decarboxylate the weed material before proceeding to make the substance for vaping.

Ingredients:

  • 1 gram of high-grade cannabis concentrate OR 5-10 grams of flower. Use less flower if it’s high quality. Use more if it’s of lower quality. As per reference, an eight oz (3.5g) of weed should produce about 35-60 mL of vape juice.
  • For solvent: Either a mix of polyethylene glycols (PEG) like PEG400, propylene glycol (PG) and vegetable glycerin (VG) OR cannabis-derived terpenes.
  • High percentage alcohol like Everclear.

Other stuff you’ll need:

  • 2 glass jars
  • Strainer
  • Baking sheet
  • Freezer
  • Oven
  • Stovetop
  • Cooking pot (for boil)
  • Aluminum foil
  • Baking sheet
  • Dropper bottles
  • Syringe

Before starting Leave the two glass jar in a freezer for 2 hours before the extraction process begins. Don’t use rubbing alcohol. Use a stovetop or a hot plate to boil off any remaining solvent, even when you use alcohol solutions like Everclear.

A woman is seen refilling her vaping device with new juice.

Step 1: Decarboxylate If you are using flowers, you will still need to decarboxylate first so that you unleash its THC contents. Preheat the oven to 240°F (115°C). Crumble the weed into a rimmed baking sheet evenly on the entire surface. A half an hour of baking your weed should do it. To prevent churning your buds, mix them every ten minutes. When you’re done with this part, you can grind the buds. Use a herb grinder or just quickly stir it in a food processor. Don’t overdo it. You don’t need powder, but a small chunky coarse mixture. If you are going with concentrates, you don’t need this step.

See also  Cbd oil for dogs in delaware

Step 2: Soak in alcohol. In one of the glass jars you previously put in the fridge pour in the baked buds. Cold helps separate lipids from cannabinoids and terpenes. But the critical step here is to pour just enough alcohol where you immerse the buds. Be gentle with how you handle the mixture. Swish back and forth without making too much movement. Put the jar back in the fridge for a couple of minutes.

Step 3: Pour the mixture into another jar. Take the other jar, cover it with cheesecloth and pour through the mixture. Squeeze and squeeze until you get to the last drop of your medicine.

Step 4: Evaporate the remaining alcohol. Fill the pot with about 4 inches of water and place in it the jar filled with liquid. Keep it in for an hour at 150-160°F. This process will help evaporate any remaining alcohol and result in a fine cannabis concentrate.

Step 5: Add PEG/VG/PG solution or add Terpenes. Once you’ve managed the alcohol part, you can proceed with adding thinning agents of your choice. About 20-25mg of any of them would work. If you add more agents, it will make the oil easier to vaporize, but it will also become less intense on THC and have more impact on the throat. In the end, it comes down to you to experiment a bit on this part and find the dosage that works best for your throat—and your high. Whether you use ready-made blends of PEG400, it’s super easy to produce the gooey substance for your e-pens. 1 ml of liquid for every gram of concentrate would do it.

With the other solutions, like vegetable glycerine extraction, there are several ways to go. You can try it out with different dosages. And you can even opt to passively prepare the e-juice over a period of 2-3 months. For this, you decarboxylate the weed, put it in a jar saturated with VG, stir the mixture and leave it on the shelf for a month. After a month, add a fresh tablespoon of VG, stir again, and leave the jar for another month. In the second month, you can extract the liquid in another jar. That is if you don’t rush with your THC juice.

One warning if you work with the faster method where you actually add in and evaporate alcohol. Try not to blow your kitchen cooking THC oil. Alcohol is a flammable substance, so you need extra caution on step four, where you proceed with evaporating. In case you want to take extra care in handling any remaining smell and taste of marijuana, add flavor to the mixture based on your preferences.

When your vape liquid is all done and gooey, put it in cartridges with a syringe, and it’s time to vape some.